Paddle-type grout mixers

Paddle grout mixers are straightforward, the simple pitched impeller / baffle design having been long established through trials and testing as the most effective mixing method to produce a smooth homogenous material.

The G range of mixers are suitable for use with any grout pump from our range, and are of standard tough construction, simple to use and maintain.

Specifications
	G10	G20	G30	G50	G100
Dimensions (HxWxD*)	850 x 540 x 650 mm (no valve)	1195 x 675 x 1110 mm	1300 x 800 x 1200 mm	1330 x 1000 x 1450 mm	1640 x 1380 x 1710 mm
Weight	46 Kg (101lb)	98Kg (216 lb)	150Kg (330 lb)	173Kg (381 lb)	225Kg (562 lb)
Approx capacity	100L	200L	300L	450L	1000L
Air consumption	Hand op	60 cfm @ 7 bar	190 cfm @ 7  bar	190 cfm @ 7  bar	310 cfm @ 7  bar
*D includes 300mm outlet valve

 Colloidal grout mixers

Technical specification of a 'colloidal' grout mixer is one in which the impeller rotates at more than 1000 rpm; the GC25 motor produces a rotation speed of approximately 1800 rpm. The mixing action involves the formation of a vortex produced by the impeller speed and recirculation of the material by tangential redirection back into the mixing tank, via a three way manually operated valve. The mixing action promotes greater hydration of the materials being mixed, and is essential when using thixotropic modern materials, perhaps containing long chain polymers. Simplicity of construction and ease of maintenance are key factors in the  GC25 design, the optimum size and style obtained through research and trials.

Dimensions (LxWxH)	1060 x 980 x 1150 mm
Capacity	Approx 250L (55 gals)
Maximum output pressure	1.5 bar (22psi)
Weight	200 kg
Power consumption	310 cfm @ 7 bar (100psi)
- pneumatic
Electrical - To Specification

Grouting accessories

Spearpoint pipes

Standard 1.5m long, 54mm OD, perforated over lower 300mm, supplied with valve. Extensions available in 1.5m lengths, and also driving head for insertion.

Dual mixer connection

Allows two mixers to be used with one pump giving a continuous flow of grout rather than intermittent batch mixes.

Pressure gauge head 

Although all pumps have fitted pressure gauges, this unit allows pressure readings close to the actual injection point, which may be necessary if pumping long distances.

Prices and terms/conditions available on application